NEC SV8500, Manual

Page: 263 / 3438

VOL.2-10
IP-BS (BS301)
< IP Address of Secondary DRS>
In the case of using Secondary DRS, specify IP address for it.
Command: set drssip
Example: Secondary IP Address is “10.41.207.31”
When IP-BS receives the settings successfully, set done message is displayed. This specified settings
can be displayed by using show drssip command. To delete the setting, enter “0.0.0.0” for the IP ad-
dress.
<Hostname, IP Address and Domain of DNS>
To specify the DRS as host, specify hostname and IP address and domain name of DNS.
Command: set dnshn / dnsip / dnsdn
Example:
Hostname: bcd01
IP Address of DNS: 10.41.207.100
Domain Name: bcd.abk
When IP-BS receives the settings successfully, set done message is displayed. This specified settings
can be displayed by using show dnshn , show dnsip , and show dnsdn commands. To delete the setting,
enter ““ for the host name or domain name, and enter 0.0.0.0 for the IP address. See the following ex-
ample.
[5] Write the settings
The system must be rebooted to write the data change. By using reboot, the IP-BS starts to operate with
the new data setting.
>set drssip 10.41.207.31
set done
>set dnshn bcd01
>set done
>set dnsip 10.41.207.100
>set done
>set dnsdn bcd.abk
>set done
>set dnshn ““
>set done
>set dnsip 0.0.0.0
>set done
>set dnsdn ““
>set done