NEC SV8500, Manual

Page: 2453 / 3438

VOL.2-2200
SR-MGC
• “SR–MGC No. Individual” radio button:
Click to specify the target SR–MGC number to copy office data.
SR–MGC Number:
Click to specify the SR–MGC number (0–255) to copy office data.
The clicked number will be displayed in “yellow.”
Re–click the number to cancel the office data copy and the display changes to “white.”
• “All SR–MGC No.” radio button:
Click to execute office data copy to all the SR–MGCs in the network.
The number with SR–MGC implemented will be displayed in “yellow.”
The number without SR–MGC implemented will be displayed in “gray.”
When there is linkage to FCCS Cluster, the number will be displayed in “magenta” if SR–MGC is
implemented in the backup node. In this case, Office Data Copy is unavailable.
The meaning of the display colors are indicated below.
[11] Initialize SR–MGC (SR T and SR S)
After finishing office data copy, the Telephony Server (MGC) requests the SR-MGC to initialize. Wait for
the SR-MGC to be initialized, which takes about five minutes.
<About SR-MGC initialization>
If Office Data Copy is performed in the following status, initialization of SR–MGC is required.
- when office data file does not exist on the CF card of SR–MGC
- after the change of the office data requiring MGC initialization
To initialize SR–MGC, use either of the following methods.
(1) Initialize SR–MGC using the CMNT command’s “Initialize” tab ( CMNT command only targets SR T):
<Initialize Tab>
• “ALL” radio button:
Execute initialization to all the SR–MGCs in the network.
Colors Meanings
Gray SR–MGC number unimplemented
White No request for Office Data Copy
Yellow Office Data Copy request is in queue (request exists)
Blue Office Data Copy is running
Green Office Data Copy was successful
Red Office Data Copy failed
Magenta (Pink) SR–MGC number implemented in backup node