NEC SV8500, Manual

Page: 2101 / 3438

VOL.2-1848
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
Note 1:
This parameter is displayed for SP-3905 MG SIP (16) PROG-A Issue 5 or later.
Note 2:
This parameter is displayed for SP-3905 MG SIP (16) PROG-A Issue 7 or later.
6 SHOW
Δ
VERSION
This command is used to show a version information installed in MG-SIP16.
----------------------------------------
Use Session Count=1
Number of sessions in use
INVITE Client Transaction = 0, max=0
Number of INVITE client transactions and their
maximum number
INVITE Server Transaction = 0, max=0
Number of INVITE server transactions and their
maximum number
Other Client Transaction = 0, max=1
Number of client transactions other than
INVITE and their maximum number
Other Server Transaction = 0, max=1
Number of server transactions other than
INVITE and their maximum number
(the maximum number represents the maximum
number counting up to this time from when MG-
SIP16 is turned on.)
The number of Filtered Messages = 0
( Out of Range = 0 , No DNS Cache = 0)
Number of SIP packets that were discarded by
SIP Access Filter
Note 1
When “disable” is selected for “SIP Access Fil-
ter”, this parameter is not shown.
The number of Burst Filtered Messages = 0
Number of incoming calls that are rejected by
Burst Access Filter
Note 2
When “disable” is selected for “Burst Access
Filter”, this parameter is not shown.
MG(SIP)>
MG(SIP) > show version
Firmware Information | SP No | Issue
-----------------------------------------------------
MG(SIP) BOOT PROG | 3839 | 01.00.00.00
MG(SIP) MAIN PROG | 3905 | 01.00.00.00
MG(SIP) AU PROG | -- | 01.00.00.00
MG(SIP) HW | -- | CA-CC10-1A
• MG(SIP) BOOT PROG: kernel version
• MG(SIP) MAIN PROG: program version
• MG(SIP) AU PROG: Music/Tone/DTMF version
• MG(SIP) HW: hardware version