NEC SV8500, Manual

Page: 525 / 3438

VOL.2-272
MC & MG with PFT
9. Setting Open/Reverse mode:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
10. Setting default receiver PAD value:
Note:
The PAD command assigns the value to decrease voice level in the receiver (IP to analog terminal) direc-
tion.
Note:
The total PAD value (Receiver PAD + Fax Receiver PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
11. Setting Pre-Ringing:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Enter ON or OFF after the command name
ON=Open valid/Reverse invalid
OFF=Open invalid/Reverse valid (default)
Line 2: Result is shown
MC-MG> SET OPEN ON
Open/Reverse setting succeeded.
Line 1: Enter the PAD value in the range of -10dB ~
20dB after the command name (default=0)
Line 2: Result is shown
MC-MG> SET PAD 3
Default Receiver PAD setting succeeded.
Line 1: Enter ON or OFF
ON=Pre-Ringing is valid (default)
OFF=Pre-Ringing is invalid
Line 2: Result is shown
MC-MG> SET PRERINGING ON
Pre-Ringing setting succeeded.