NEC SV8500, Manual

Page: 3307 / 3438

VOL.3-820
CHAPTER 4 CONFIGURATION SETUP
Note 2:
This menu has the same function with “2. Directory (Not Earlier than FW 2.0.0.0 but Earlier Than FW
5.0.0.0)”
→ “2. Edit.”
Note 3:
The following shows the operating procedure from Directory Search to Directory Add:
STEP 1:This Directory Search menu has the same function with “2. Directory (Not Earlier than FW 2.0.0.0 but
Earlier Than FW 5.0.0.0)”
→
“1. Personal”
→
“1. Search.” On searching, data (name) are listed in
alphanumeric order (see LCD-1).
STEP 2:Select the target data on the list, and then press the software key for “OK” to move on to LCD-2.
STEP 3:In the example below, from “2.Tel #2” to down on the list are vacant and new numbers can be added
to. Select “2.Tel #2” and press the software key for “OK” to move on to Category Set screen (LCD-3).
Follow the sub menu “2. Directory Add”
→
“1. New” for the subsequent procedure.
* This is an example for DT730 Series (Standard LCD).
2. Addition Adds numbers to searched data. - X X
Directory Search
Note 3
Searches the Directory data to which you want to
add the number
- X X
Directory Add
Note 3
Adds the number to the searched data on the
Directory
- X X
3. Prefix Adds a prefix to the number displayed on the LCD. - X X
4. Delete One Deletes one history displayed on the LCD. - X X
5. Delete All
Deletes all the history of the corresponding
category (Missed, Outgoing, Incoming)
- X X
Parameter Description Default
DT750
Series DT730
Series
[Directory]
1.NEC ICHIRO
2.NEC TARO
3.NEC HANAKO
Back OK
LCD-1
[Directory]
1.2000
2.Tel#1
3.Tel#2
Back OK
LCD-2
[Category]
1.Company
2.Mobile
3.Voice Mail
Back OK
LCD-3