NEC SV8500, Manual

Page: 970 / 3438

VOL.2-717
MG-COT Card [SCA-6COTB]
10.4.2 Error Messages
When an error occurs in using the maintenance command, error message is indicated to show the cause for help-
ing the reassignment of required data.
List of Error Messages
MESSAGE CAUSE
File not found on the TFTP server. Download file of system data is not founded on the TFTP server.
Command not found. Not supported command was entered when entering command.
Invalid parameter. Invalid parameter was entered when entering command.
IP address form is incorrect. IP address is entered in incorrect form.
VLAN ID is no more registered.
VLAN ID cannot be registered because the number of VLAN exceeds
the maximum.
Sub command is missing. Sub command is not entered when entering command.
Invalid parameter value. The range of entered parameter is incorrect.
Invalid sub command. Entered sub command is incorrect.
Command is abnormally terminated. Command is terminated illegally.
Parameter(s) are missing. Parameter is not entered when entering command.
Entered VLAN ID is already registered. Entered VLAN ID has been already registered.
Entered VLAN ID is not registered. Entered VLAN ID does not exist.
This command is not supported in a present opera-
tion mode. The entered command is not supported in the operation mode currently
works.