NEC SV8500, Manual

Page: 389 / 3438

VOL.2-136
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
• When DHCP server is used
In this setting, because 8LC Card automatically gets IP address from DHCP server, it is not required to set
IP address and Default Gateway on 8LC Card. Set the Ethernet Speed as follows.
1. Communication speed of LAN interface
IP addresses listed below, however, need to be assigned on DHCP server side.
Note 1
• IP address of Default Gateway
• IP address of SIP server
Note 2
* Check the number of IP addresses saved in DHCP server is sufficient so as to get IP address of 8LC Card
anytime.
Note 1:
Assign DHCP option on DHCP server as follows.
Class: Global
Name: Not specified, but do not enter the same option name in duplicate (e.g. SP1)
Data: IP address
Array: Checked
Code: 162
Note 2:
About IP address of SIP server (Telephony Server), refer to “Registration Destination of IP Devices/Sta-
tions” in INTRODUCTION of Installation Manual.
--- Ethernet Speed set ---
Current LAN Speed: AUTO
Change LAN Speed? [Y(change)/N(current)/Q(quit)]: Y
Input new Speed [1(AUTO)/2(100M)/3(10M)]: 2
Input new DUPLEX [F(full)/H(half): F