NEC SV8500, Manual

Page: 339 / 3438

VOL.2-86
Analog 2MC (Analog Media Converter)
SET COMMAND
1. Setting Burst Ringer Pattern:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
2. Setting Channel Attribute:
Note:
Data transmission (voice data for G.726 mode) is supported by using PCPro command AISTL.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
3. Setting Country Code:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Select the Ringer Pattern from the following:
1: 0.35 seconds ON - 0.3 seconds OFF - 0.35 sec-
onds ON (default)
2: 0.4 seconds ON - 0.2 seconds OFF - 0.4 seconds
ON
3: 0.2 seconds ON - 0.2 seconds OFF -
0.2 seconds ON - 0.2 seconds OFF - 0.2 seconds
ON
4: 0.2 seconds ON - 0.4 seconds OFF - 0.2 seconds
ON -
0.2 seconds OFF
5: 0.25 seconds ON - 0.25 seconds OFF -
2A-MC>SET BURSTPATTERN 5
Burst Ringer Pattern setting succeed-
ed.
2A-MC>_
Line 1: Enter the Channel Number 0 or 1 after the
command name
0/1=CH0/CH1
Line 2: Select No Linear processor for echo cancel-
ler
ON /OFF=valid (default)/invalid
Line 3: Result is shown
2A-MC>SET CHANNELATTRIBUTE 0
NLP (ON/OFF):ON
2A-MC>_
Line 1: Enter the Country Code
JPN=Japan
USA=America
AUS=Australia
AUTO=Corresponding to MGC or default
Line 2: Result is shown
2A-MC>SET COUNTRYCODE AUTO
Country code setting succeeded.(0x0000)
2A-MC>_