NEC SV8500, Manual

Page: 1585 / 3438

VOL.2-1332
MG-T1(SIP) [SCA-24DTIA]
REBOOT COMMAND
1. REBOOT
This command is used to reboot the MG-T1(SIP).
EXIT COMMAND
1. EXIT
This command is used to exit the program.
• Normal operation:
• When configuration data is changed, the following is displayed according to the changed data:
Note:
If EXIT command is executed at OS(MG) prompt, any key entry will not be effective. In this case, press
Ctrl+C keys together to display OS prompts.
MG-T1(SIP)> REBOOT
Do you need reboot? [Y/N]: Y Y =Reboot
N =Not reboot
MG-T1(SIP)> EXIT
->
Returns to OS prompt.
MG-T1(SIP)> EXIT
Configuration data was changed.
** Don’t power off in progress **
y: Save and Exit.
n: Exit without saving.
c: Cancel
y =Save the file and exit the program
n =Exit the command without saving
c =Cancel the command
[y/n/c]: y
Enter “y” to save the changed data and exit the configu-
ration command.
Configuration data has been saved.
Result is displayed.