NEC SV8500, Manual

Page: 186 / 3438

VOL.1-126
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
PAYLOAD SIZE (Payload Size):
• 10ms
• 20ms
• 30ms
• 40ms
• 60ms
Note: For available payload type/payload size, refer to “3.1.1 Bandwidth Required for Voice Traffic”.
Note: When no payload type and size are specified, the values assigned via System data (ASYDL, System Data
1, Index 819, Bits 0 - 3 and 4 - 7) are automatically applied.
Note:
If payload type G.711 is specified to more than two priorities in PRI 1 through PRI 4, assign different
payload size to each priority.
• When payload types G.723.1 (5.3K


6.3K) and G.723.1 (6.3K

5.3K) are to be assigned on
the same terminal, specify the same value to the payload size of both types.
• It is not necessary to assign the payload type/size to the whole priorities. Specifying the first
priority only is allowed.
STEP 3: ASFC
Assign the following SFI to grant an exception to the bandwidth restriction.
SFI = 199 (Bandwidth Restriction)
RES = 1 (Restriction is not applied)
STEP 4: ABNDL
Assign bandwidth control data. An explanation is given using the following network configuration.
(a) Enter the Location ID.
START LOC-ID: Enter LOC-ID of Calling Party (0-4095)
END LOC-ID: Enter LOC-ID of Called Party (0-4095)
<Routing table> Field
(b) Press the Get button to display the routing table between the specified locations.
(c) Enter the data in the routing table.
2M
2M
3M
3M
4M
LOC-ID=1
LOC-ID=0
LOC-ID=2
LOC-ID=3
LOC-ID=4