NEC SV8500, Manual

Page: 1405 / 3438

VOL.2-1152
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
• For ISDN Trunk Data
The other data should be “0” (default data).
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
Note 1:
INT (CDN65): 1 N-ISDN2
2 Australia
4 ITU (CCITT), ETSI (PRI)
5 AT&T (#4/#5 ESS)
6 ETSI (BRI)
7 NT DMS 100/DMS 250
Note 2:
When you assign 65(INT)=4 (EMEA only), refer to 5. ETSI ISDN Data Assignment in Chapter 3 of Data
Programming Manual - ISDN.
Note 3:
In the case of “SUB ADDRESS - ADDRESSING”, assign “0”. (Refer to SUB ADDRESS-ADDRESSING
[S-95] in Data Programming Manual - ISDN.)
In the case of “DID ADDRESSING”, refer to DIRECT INWARD DIALING (DID) ADDRESSING [D-123]
in Data Programming Manual - ISDN.
RT=20 (Virtual Speech Channel)
CDN 2 (ONSG) = 2
4 (INSG) = 2
5 (TF) = 3
6 (TCL) = 1
7 (L/T) = 1
8 (RLP) = 2
10 (SMDR) = 1
15 (LSG) = 12
28 (ANS) = 1
30 (PAD) = 4
31 (OGRL) = 1
32 (ICRL)
= 1
34 (GUARD) = 1
45 (A/D)
= 1
50 (DPLY) = 1
60 (TC/EC) = 1
63 (LYER1) = 1
65 (INT)
= Note 1, Note2
66 (DC) = Note 3
116 (PREF) = 0/1 Note 4
RT=10 (Virtual Signaling Channel)
CDN 2 (ONSG) = 2
4 (INSG) = 2
6 (TCL) = 1
7 (L/T) = 1
8 (RLP) = 2
15 (LSG) = 13
28 (ANS) = 1
30 (PAD)
= 7
63 (LYER1) = 1
65 (INT)
= Note 1, Note2
66 (DC) = Note 3