NEC SV8500, Manual

Page: 990 / 3438

VOL.2-737
MG-BRI
IP PRECEDENCE:
Priority: Assign value within 0-7.
- LOW DELAY (Add a check if required)
- THROUGH PUT (Add a check if required)
- RELIABILITY (Add a check if required)
- MIN COST (Add a check if required)
DIFFSERV
Priority: Assign value within 00-63.
Setting of PAD:
Click this check box when setting data for PAD value of MG
PAD Information:
This parameter is available only when the check box of “Setting of PAD” is ON.
No = 1: The PAD value of MG when DtermIP/Soft Phone/INASET is connected
No = 2: The PAD value of MG when Analog MC/Digital MC is connected
No = 3: The PAD value of MG when IPPAD is connected
No = 4: The PAD value of MG when MG is connected
Setting of Echo Canceller:
Click this check box for the setting of Echo Canceller.
EC TYPE: This parameter is available only when the check box of “Setting of Echo Canceller” is
ON. Select either of the radio buttons for specifying the type of Echo Canceller.
•
A EC-ON/B EC-ON (Fixed when using IP-BS)
• A EC-ON/B EC-OFF
Note 1
• A EC-OFF/B EC-ON
Note 1
• A EC-OFF/B EC-OFF
Note 1:
“A EC-ON/B EC-OFF” and “A EC-OFF/B EC-ON” will not be effective when A RT (MG Storing) and B
RT (MG Storing) is same.
Note:
The setting of the Echo Canceller may not be effective because of the Switch setting of IPPAD. Refer to the
Circuit Card Description for further information.