NEC SV8500, Manual

Page: 2062 / 3438

VOL.2-1809
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
15 SET Δ DRSADDRESS
This command is used to assign DRS address to MG-SIP16.
Note:
About IP address of DRS (Telephony Server), refer to “Registration Destination of IP Devices/Stations” in
INTRODUCTION of Installation Manual.
Note:
unit(0), unit(1), unit(2), and unit(3) represent primary, secondary, tertiary, and fourthly respectively.
16 SET Δ DRS_QOS
This command specifies the value of Type of Service (ToS) field on packets from MG-SIP16 to DRS.
When IP PRECEDENCE (=1) is selected:
MG(SIP) > set drsaddress
DRS unit(0)
DRS IP address: 172.16.253.1
DRS port number(1024-65535): 3456
DRS unit(1)
DRS IP address: 172.16.253.2
DRS port number(1024-65535): 3456
DRS unit(2)
DRS IP address: 172.16.253.3
DRS port number(1024-65535): 3456
DRS unit(3)
DRS IP address: 172.16.253.4
DRS port number(1024-65535): 3456
• Assign the IP address of unit (0) (Default: 0.0.0.0).
• Assign the UDP port number for unit(0) (Default: 3456).
• Assign the IP address of unit (1) (Default: 0.0.0.0).
• Assign the UDP port number for unit(0) (Default: 3456).
• Assign the IP address of unit (2) (Default: 0.0.0.0).
• Assign the UDP port number for unit(0) (Default: 3456).
• Assign the IP address of unit (3) (Default: 0.0.0.0).
• Assign the UDP port number for unit(0) (Default: 3456).
MG(SIP) > set drs_qos
Input type: (1=PRECEDENCE/2=DIFFSERV/3=TOS): 1
PRECEDENCE(0-7): 5
DELAY(0/1): 0
THROUGHPUT (0/1): 0
RELIABILITY(0/1): 0
COST(0/1): 0
• When IP PRECEDENCE (=1) is selected:
• Specify the precedence (default: 5).
Note 1
0-7 (Low - High)
• Specify the delay (default: 0).
0/1 = Normal/Delay
• Specify the throughput (default: 0).
0/1 = Normal/High Throughput
• Specify the reliability (default: 0).
0/1 = Normal/High Reliability
• Specify the cost (default: 0).
0/1 = Normal/Cost Precedence