NEC SV8500, Manual

Page: 751 / 3438

VOL.2-498
MCMG Card [SCA-7COTA]
SETUP COMMAND
F
To assign the data related to IP address simply:
• When DHCP option is used (to get DRS address):
• When DHCP option is not used
:
Note 1:
About IP address of DRS (Telephony Server), refer to “Registration Destination of IP Devices/Stations” in
INTRODUCTION of Installation Manual.
MC-MG> setup
MG-ID = 00:30:13:16:ae:fa
MAC address is displayed.
Use DHCP?
Input [Y(Yes)/N(No)/Q(Quit)]:y
Enter “y.”
Use DHCP option? (Get DRS address)
Input [Y(Yes)/N(No)/Q(Quit)]:y
Enter “y.”
--------------------------------------
MG-ID = 00:30:13:16:ae:fa
DHCP = ENABLE
--------------------------------------
Setting result is displayed.
Input [Y(OK)/N(Change)/Q(Quit)]:y
Enter “y” when the assigned data is correct.
MC-MG> setup
MG-ID = 00:30:13:16:ae:fa
MAC address is displayed.
Use DHCP?
Input [Y(Yes)/N(No)/Q(Quit)]:y
Enter “y.”
Use DHCP option? (Get DRS address)
Input [Y(Yes)/N(No)/Q(Quit)]:n
Enter “n.”
DRS1 ADDRESS (XXX.XXX.XXX.XXX):1.1.1.1
Enter the IP address of DRS.
Note 1
--------------------------------------
MG-ID = 00:30:13:16:ae:fa
DHCP = ENABLE
DRS1 ADDRESS = 1.1.1.1
--------------------------------------
Setting result is displayed.
Input [Y(OK)/N(Change)/Q(Quit)]:y
Enter “y” when the assigned data is correct.