NEC SV8500, Manual

Page: 2003 / 3438

VOL.2-1750
MG-SIP16
37 SET Δ SIP_QOS
This command is used to specify the QoS of Session Initiation Protocol (SIP).
38 SET Δ SIP_REGISTER
The command is used to assign an IP address or a Fully Qualified Domain Name (FQDN) to the SIP reg-
istrar. This command is required for using a Proxy Server.
When IP address (=0) is selected
:
When FQDN (=1) is selected
:
Note 1:
Be sure not to enter a space after FQDN characters.
39 SET Δ SIP_ROUTE
This command is used to specify route information in the SIP side network. The registered number of the
route information is up to 10.
MG(SIP) > set sip_qos
See SET DRS_QOS command for more details.
MG(SIP) > set sip_register
SIP register type(0=IP address/1=FQDN):_
• Select the registrar type.
0: IP address
1: FQDN
MG(SIP) > set sip_register
SIP register type(0=IP address/1=FQDN):0
SIP register IP address: 192.168.100.100
SIP register port number(1024-65535): 5060
SIP register expires time(1-65535): 3600
• When IP address (=0) is selected.
• Assign the IP address of the SIP registrar (default: 0.0.0.0).
• Assign the port number of the SIP registrar (default: 5060)
• Assign the registrar alive time in seconds (default: 3600).
MG(SIP) > set sip_register
SIP register type(0=IP address/1=FQDN):1
Full Qualified Domain Name(MAX63): nec.com
SIP register port number(1024-65535): 5060
SIP register expires time(1-65535): 3600
• When FQDN (=1) is selected.
• Assign the FQDN (default:0, max 63 characters).
Note 1
• Assign the port number of the SIP registrar (default: 5060)
• Assign the registrar alive time in seconds (default: 3600).
MG(SIP) > set sip_route
See SET IPX_ROUTE command for more details.