NEC SV8500, Manual

Page: 2018 / 3438

VOL.2-1765
MG-SIP16
When SIP status (=2) is selected [Multi Registration Mode is enabled]:
Note:
In the above example, registration was attempted for 16 numbers toward the SIP server. However, 8 num-
bers failed. Assign MG-No by using ASRIL command. “CNT” is a parameter of ASRIL command.
6 SHOW Δ VERSION
This command is used to show a version information installed in MG-SIP16.
MG(SIP) > show status
0: Port status
1: IPX status
2: SIP status
9: Exit
Please choose a reference number:2
MG(SIP) > IPX Registration Information
Registration Done.
MG(SIP) > SIP Registration Information
------Registration NG RegIndex------
[MG-No:1]
9 10 11 12 13 14 15
[MG-No:2]
[MG-No:3]
[MG-No:4]
------Registration OK RegIndex------
[MG-No:1]
1 2 3 4 5 6 7 8
[MG-No:2]
[MG-No:3]
[MG-No:4]
When SIP status (=2) is selected:
• registration failed CNT (RegIndex)
information is displayed here.
• registration failed CNTs
• registration OK CNT (RegIndex)
information is displayed here.
• registration OK CNTs
MG(SIP) > show version
Firmware Information | SP No | Issue
-----------------------------------------------------
MG(SIP) BOOT PROG | 3842 | 01.00.00.00
MG(SIP) MAIN PROG | 3843 | 01.00.00.00
MG(SIP) AU PROG | -- | 01.00.00.00
MG(SIP) HW | -- | PZ-CC162-2A
• MG(SIP) BOOT PROG: kernel version
• MG(SIP) MAIN PROG: program version
• MG(SIP) AU PROG: Music/Tone/DTMF version
• MG(SIP) HW: hardware version