NEC SV8500, Manual

Page: 831 / 3438

VOL.2-578
MG-COT Card [SCA-6COTA/SCA-6COTC]
F
Setting IP Address and Subnet Mask of MG-COT Card:
Note:
This setting is required when DHCP server is “D (disable)”.
F
Setting Host name of MG-COT Card:
Note:
This setting is required when DHCP server is “D (disable)” and DNS server is “E (enable)”.
F
Setting Default Gateway IP Address:
Note:
This setting is required when DHCP server is “D (disable)”.
--- IP Address & Subnetmask set ---
Current IP Address: 0.0.0.0 Current Subnetmask: 255.255.255.0
Change IP Address & Subnetmask? [Y(change)/N(current)/Q(quit)]: Y
Input new IP Address: 10.41.1.100 Input new Subnetmask: 255.255.255.0
Line 2: The current setting is displayed.
Line 3: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 4: Enter new IP address of MG-COT Card (e.g. 10.41.1.100)
Line 5: Enter new Subnet Mask (e.g. 255.255.255.0)
--- Host Name set ---
Current Host Name: No Value
Is there the Host Name? [Y/N]: Y
Input new Host Name: mgcot.nec.com
Line 2: The current setting is displayed.
Line 3: Asked whether to use host name.
Y=Use host name
N=Not use host name
Line 4: Enter new host name of MG-COT Card in full-domain format.
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y(change)/N(current)/Q(quit)]: Y
Input new Default Gateway: 10.41.1.254
Line 2: The current setting is displayed.
Line 3: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 4: Enter new IP address of Default Gateway (e.g. 10.41.1.254)