NEC SV8500, Manual

Page: 3358 / 3438

VOL.3-871
CHAPTER 4 CONFIGURATION SETUP
6.6 Configuration Menu List (FW 5.0.0.0 or later)
This section lists the configuration menu used for DT700 Series configuration setting. DT750 Series, DT730
Series, and DT710 Series columns on the tables below show whether the menu is available or not for each ter-
minal type.
Note:
DT710 Series supports Tool and Config menu only.
Note:
For DT750 running firmware version 4.0.0.0 or later, and DT730 running firmware version 5.0.0.0 or later,
the following menus are not displayed on the menu window: Tool, Call Func., Presence, Favorite and Con-
fig. To open Config menu, press digit key “0.”
Note:
The supported parameter information for DT710 DESI-Less is same as DT730/DT730G Series.
Note:
Service menu is displayed only when the URL is registered by[0.Config] - [6.Application Setting] - [1.XML
Settings] - [4.Service URL]. For DT710 Series, Tool menu is displayed instead of Service menu.
Note:
When [C-195] Call History (ASFC SFI: 238) is in service, the LCD moves on to the list of Call History.
The parameters under [History] menu is not available.
Note:
Even though Terminal Call History is set as out of service (ASFC SFI: 248=0), the parameters under [His-
tory] menu will be displayed on the terminal’s configuration menu regardless of SFI: 248 data setting.
Note 1:
On [History] menu, pressing the software key for “Option” displays the following sub menu.
LEGEND X: Available N: Not available -: Not applicable
1. History (FW 5.0.0.0 or later)
Parameter Description Default
DT750
Series DT730
Series
1. Missed Note 1 Lists the history of missed calls. - X X
2. Outgoing
Note 1
Lists the history of outgoing calls. - X X
3. Incoming Note 1 Lists the history of incoming calls. - X X
4. Delete All Deletes the call history completely. - X X
Parameter Description Default
DT750
Series DT730
Series
1. Call
Originates a call to the number displayed on the
history.
- X X
2. Directory Add
Registers the number displayed on the history to
Directory.
- X X