NEC SV8500, Manual

Page: 3022 / 3438

VOL.3-535
CHAPTER 4 CONFIGURATION SETUP
4.1.4 Subnet Mask
On the Subnetmask parameter, set subnet mask of the terminal.
STEP 1: Select “4. Subnetmask” by pressing “4” key on the Network Settings Menu.
Network Settings Menu
STEP 2: Enter the subnet mask. For example, to set the subnet mask of 255.255.240.0, enter 255*255*240*0
[separate with an asterisk (*)].
Note:
To delete an entered character, press BK key.
STEP 3: After entering the subnet mask, press OK key and go back to the Network Settings Menu.
STEP 4: Press Exit key on the Network Settings Menu to return to the Main Menu.
STEP 5: Press Save key on the Main Menu to save the assigned data.
Up Down Exit
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Cancel OK
Use
′
*
′
For .
Subnet? XXX.XXX.XXX.XXX
BK