NEC SV8500, Manual

Page: 2502 / 3438

VOL.3-15
CHAPTER 1 TERMINALS
1.4.3 DT700 Series Cabling
To connect DT700 Series (DT730/DT730G/DT710) to the network device such as HUB, PoE Switch through
the LAN cable, use the following procedure. Prepare LAN cables (10BASE-T/100BASE-T/TX straight-
through) for connecting the telephone to network device.
STEP 1: When AC adapter is used to supply power to a telephone, insert the DC plug of the AC adapter to the
DC input connector on the back of the telephone.
Note:
The insertion and removal of the DC plug of the AC adapter must be made with LAN cables disconnected
from the telephone.
STEP 2: Thread the DC cord of the AC adapter through the groove on the back of the telephone.
STEP 3: Connect the telephone to the network device using a LAN cable.
When you connect the telephone to a PC, connect them through a connector on the back of the tele-
phone using a LAN cable.
STEP 4: Thread the LAN cable through the groove on the back of the telephone.
Telephone
DC Plug
DC Cord
Groove
DC Input Connector
Telephone
To LAN
Groove
LAN Cable
(Straight-through)
To PC