NEC SV8500, Manual

Page: 2005 / 3438

VOL.2-1752
MG-SIP16
When FQDN (=1) is selected
:
Note:
Be sure not to enter a space after FQDN characters.
42 SET
Δ
SIP_TEL_SERVICE
The command is used to enable/disable the use of additional service features (Hold/Retrieve/Transfer from
the SIP network side terminal).
When enable (= 1) is selected:
Note:
Assign this command adjusting to the specification on SIP network.
Note:
Setting of a=inactive hold function enable/disable is available for SP-3843 SIPMG PROG-B Issue 6 or lat-
er.
MG(SIP) > set sip_server
SIP server type(0=IP address/1=FQDN):1
Fully Qualified Domain Name(MAX63):nec.com
SIP server port number(1024-65535): 5060
Strict or Loose(0/1): 0
Domain Name(MAX128):_
• When FQDN (=1) is selected.
• Assign the FQEN of the proxy server in a maximum of 62 char-
acters (default: 0).
• Assign the port number of the proxy server (default: 5060)
• Select a Strict router or Loose router for the proxy server (default:
0).
0: Strict router
1: Loose router
• Input a string that specifies the service provider in a maximum of
128 characters.
MG(SIP) > set sip_tel_service
Is SIP telephony service function disable?
(0: disable/1: enable(default=0)): _
• Enable/disable additional service feature.
0: additional service feature is disabled (default)
1: additional service feature is enabled
MG(SIP) > set sip_tel_service
Is SIP telephony service function disable?
(0: disable/1: enable(default=0)):1
Is Replaces function enable? (0: enable/1: disable(default=0)):_
• When enable (=1) is selected:
• Enable/disable Replaces function.
0: enable (default)
1: disable
Is hold [a=inactive] function enable? (0: enable/
1: disable(default=0)): _
0: a=inactive hold function is enabled (default)
1: a=inactive hold function is disabled