NEC SV8500, Manual

Page: 2069 / 3438

VOL.2-1816
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
[To Delete the assigned Routing Information]
Note 1:
If there is no route to be deleted, the following will be displayed.
Note 2:
Pressing any key other than “y” displays the following message.
Note:
Routing assignment is unnecessary for network segment assigned to Ether (0).
MG(SIP) > set ipx_route
Route type(0: Exit/1: None/2: Static): 2
Select command (0: Exit/1: Set/2: Delete): 2
No | Gateway address | Destination network / Prefix
--------------------------------------------------
1 | 192.168. 0.254 | 172.16. 0. 0 / 16
2 | 172. 16. 0.254 | 10. 0. 0. 0 / 8
Select Delete No?: 1
No | Gateway address | Destination network / Prefix
--------------------------------------------------
1 | 172. 16. 0.254 | 10. 0. 0. 0 / 8
Are you sure? Y/N=y
MG(SIP) > _
• Select 2 to delete routing data.
• Select 2 to delete routing data.
Note 1
• Select No of Static Route Information
you want to delete. (In this example,
1 is specified.)
• Enter “y” to delete the data.
Note 2
There is no static route table to delete.
Route setting command was interrupted.