NEC SV8500, Manual

Page: 2330 / 3438

VOL.2-2077
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
LS
1. To display detailed information for directories and files:
CP
1. To copy file:
MV
1. To move and rename file:
Note:
File cannot be moved between another disks: for example “/cf” and “/wave”. In this case, use the CP com-
mand.
Note:
This command can be used to move the file, regardless of the file attribute such as read-only file.
VS-32> LS /P1
Listing Directory /system
-rwxrwxrwx 10 0 2172 May 22 14:00 sysdata
P1: Enter the directory following the LS command.
For the directory tree, refer to page 2050.
/system --- configuration data is stored
/wave --- wave file is stored
/cf --- CF memory card
* When
P1 is omitted, current directory and file
name is displayed.
VS-32> CP /P1 /P2 Specify the source and destination files to copy
following the
CP command.
P1: Source directory and file name
P2: Destination directory and file name to be copied to.
(e.g. “cf/001.wav” for P1 and “wave/001.wav” for P2 )
copying file /cf/001.wav -> /wave/001.wav
Copy OK: 2172 bytes copied Result is shown.
VS-32> MV /P1 /P2
Specify the source and the destination files to move or rename
following the
MV command.
P1: Source directory and file name
P2: Destination directory and file name to be moved to or
renamed
(e.g. “/cf/annc.wav” for P1 and “/wave/001.wav” for P2 )