NEC SV8500, Manual

Page: 1600 / 3438

VOL.2-1347
MG-SIP128 [MG-128SIPMGG]
• If you select one port in the number of port setting, be careful not to use the same RTP port number when
setting the non-default SIP network RTP base port number (by “set sip_rtp_port_no” command) or IPX net-
work RTP base port number (by “set ipx_rtp_port_no” command).
• Set the routing information if required.
17.3.3 Setting of the Telephony Server Information
Assign the IP address and port number of the Telephony Server. Set the Primary DRS only, and skip for Sec-
ondary and later DRS by pressing Enter key.
[Display example]
Note:
To make this assignment effective, it is required to execute the “REBOOT” command to save the
configuration and restart the MG-SIP128 [MG-128SIPMGG].
MG(SIP) > set drsaddress
[Primary DRS Setting]
Configures Primary DRS.
Input IP address.(default=0.0.0.0)
:172.16.253.1 Assign the IP address of the Tele-
phony Server (Default: 0.0.0.0).
Input Port Number.(1024-65535(default=3456)
:3456
Assign the UDP port number of the
Telephony Server (Default: 3456).
[Secondary DRS Setting] Do not assign.
Input IP address.(default=0.0.0.0)
:0.0.0.0
Input Port Number.(1024-65535(default=3456)
:3456
[Tertiary DRS Setting] Do not assign.
Input IP address. (default=0.0.0.0)
:0.0.0.0
Input Port Number. (1024-65535(default=3456)
:3456
[Quaternary DRS Setting] Do not assign.
Input IP address. (default=0.0.0.0)
:0.0.0.0
Input Port Nunber. (1024-65535(default=3456)
:3456