NEC SV8500, Manual

Page: 1481 / 3438

VOL.2-1228
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
When P1=0215:
23. SET Δ PRI_LOOPBACK Δ [ P1 ]
This command is used to specify Loop-back data for PRI (2M). To make this assignment effective, it is
required to execute the “SAVE” command and to restart before exiting the maintenance command.
When P1 is not entered:
When P1=0000:
MG-PRI(SIP)>SET PRI_COMMON1 0215
P1 -Specify a set value
0000-FFFF = Set value (default value: 0215)
set value is 0x0215
setting succeeded.
Result is displayed.
MG-PRI(SIP)>SET PRI_LOOPBACK
Local Loop Back
(0/1: 0):0
1) Enable/Disable Local Loop-back
0 (fixed)
Line Loop Back (0/1: 0):0
2) Enable/Disable Line Loop-back
0/1 =Disable(default)/Enable
Payload Loop Back (0/1: 0):0
3) Enable/Disable Payload Loop-back
0/1 =Disable(default)/Enable
Dch Make Busy (0/1: 0):0
4) Enable/Disable Dch Make-Busy
0/1 =Disable(default)/Enable
Dch Loop Back (0/1: 0):0
5) Enable/Disable Dch Loop-back
0 (fixed)
Dch Self-test (0/1: 0):0
6) Enable/Disable Dch Self-Test
0 (fixed)
set value is 0x0000
setting succeeded.
Result is displayed.
MG-PRI(SIP)>SET PRI_LOOPBACK 0000
P1 -Specify a set value
0000-FFFF = Set value (default value: 0000)
set value is 0x0000
setting succeeded.
Result is displayed.