NEC SV8500, Manual

Page: 3152 / 3438

VOL.3-665
CHAPTER 4 CONFIGURATION SETUP
A
B
[PC Port Settings]
3.Port VLAN ID
4.Port VLAN Priority
5.Port Available
Exit
[PC Port Settings]
6.EAPOL Forwarding
4.Port VLAN Priority
5.Port Available
Exit
STEP 4: On [PC Port Settings] menu, select "5. Port Available."
STEP 6: The LCD returns to [PC Port Settings] menu. Press the software key for "Exit."
STEP 7: The LCD returns to [Advanced Settings] menu. Press the software key for "Exit."
STEP 5: The LCD displays [Port Available] setting screen.
Perform either of the following:
a.) When automatically setting the DT700 Series terminal's PC
port status following the setting on PCPro:
b.) When disabling the DT700 Series terminal's PC port without
following the setting on PCPro:
1. Select "0. Automatic."
2. "0. Automatic" flashes.
3. Press the software key for "OK."
1. Select "1. Disable."
2. "1. Disable" flashes.
3. Press the software key for "OK."
[Port Available]
0.Automatic
1.Disable
Cancel OK
1. Speed & Duplex
2. Port VLAN Mode
3. Port VLAN ID
4. Port VLAN Priority
5. Port Available
6. EAPOL Forwarding
PC Port Settngs Menu List
Up
Down
[Advanced Settings]
1.LAN Port Settings
2.PC Port Settings
3.CDP Mode
Exit