NEC SV8500, Manual

Page: 3354 / 3438

VOL.3-867
CHAPTER 4 CONFIGURATION SETUP
4. 802.1X Supplicant
Sets 802.1X authentication related
parameter.
- X X
1. Supplicant
Sets whether to use supplicant on DT700
Series.
Disable X X
1. Disable Supplicant is disabled on DT700 Series.
2. Enable Supplicant is enabled on DT700 Series.
2. EAP Method Not used. - - -
3. Account Sets user ID for EAP-MD5. - X X
4. Password Sets password for EAP-MD5. - X X
5. EAP VLAN Mode
Selects whether to add VLAN tag to EAP
packet.
Enable X X
1. Disable VLAN tag is not added to EAP packet.
2. Enable VLAN tag is added to EAP packet.
5. VPN Client Not used. - - -
6 USB Sets USB related parameter. - X X
1 Power
Sets whether to supply power to USB
devices.
Enable X X
1 Disable Power is not supplied to USB devices.
2 Enable Power is supplied to USB devices.
5. Terminal Information Displays terminal information. - X X
Hardware Version Displays hardware version of DT700 Series. - X X
MAC Address Displays MAC address of DT700 Series. - X X
Firmware Version Displays firmware version of DT700 Series. - X X
0. Config
(Continued)
Parameter Description Default
DT730G
(12/24CG)
DT730G
(12/24DG)