NEC SV8500, Manual

Page: 1667 / 3438

VOL.2-1414
MG-SIP128 [MG-128SIPMGG]
Note: Inband Tone of MG-SIP128 [MG-128SIPMGG] can be changed by using the following System
Data (ASYDL SYS1 INDEX811). To change the Inband Tone of MG-SIP128 [MG-128SIPMGG],
set the configuration command “set country_code” to “0”.
(60) multisession
Setting of Silent Monitor (Multi-Path Monitor) Connection
This command is used to set Silent Monitor (Multi-Path Monitor) Connection using MG-SIP128 [MG-
128SIPMGG] in the ACD system.
[Setting Example]
(61) name_display
Setting of Name Display service
This command is used to enable/disable Name Display service using MG-SIP128 [MG-128SIPMGG].
[Setting Example]
211 = ES (Spain)
212 = AT (Austria)
213 = BE (Belgium)
214 = GB [EMEA] (England [for EMEA])
215 = GR (Greece)
216 = SZ (Switzerland)
217 = ZA (South Africa)
Other values = xx (Not used)
MG(SIP) > set multisession
<< Current Setting >>
Multi-Session setting:disable
Displays the current setting.
Select Multi-Session setting.
0 = disable (default)
1 = enable
Input:1
0: Disabled (default)
1: Enabled
<< Result >>
Multi-Session setting:enable
Displays the result.
MG(SIP) > set name_display
Select function of Name Display.
0 = disable (default)
1 = enable
Input:1
0: Disabled (default)
1: Enabled