NEC SV8500, Manual

Page: 259 / 3438

VOL.2-6
IP-BS (BS301)
Caution:
• Do not take the equipment apart.
• Do not short the positive/negative terminals of the AC adapter.
• Pull out the AC adapter for safety in case of lightning nearby.
• Do not touch the power plug by wet hand.
• Do not use the multiple outlet extension plug/code.
• Do not use it under the voltage other than the specified voltage.
• Pull the AC adapter itself (not the code) when pulling out the AC adapter.
• Do not fold, pull or twist the power code. Beware not to damage it.
• Please, take note in the following when making busy IP-BS by using MBNCSL/MBNCSN command.
• IP-BS indicated as "Master Synchronization" or "Master on Autonomous" on COCS6L/COCS6N
command is operating as an IP-BS synchronization source. If the Primary IP-BS or Sub-Primary IP-
BS is placed in make-busy state, all IP-BS that are synchronizing with the Primary or Sub-Primary IP-
BS will become inoperative.
• When you want to disable some IP-BS for a testing purpose, make busy the speech channel of the IP-
BS by using the MBCSL/MBCSN command.
• If the IP-BS is placed in make busy state by other than "Speech Channel Make-Busy", the IP-BS cannot
start operation if the Primary IP-BS or Sub-Primary IP-BS is not operating.