NEC SV8500, Manual

Page: 1768 / 3438

VOL.2-1515
MG-SIP128 [MG-128SIPMGJ]
This command is used to select music type that is sent from MG-SIP128 [MG-128SIPMGJ].
[Setting Example]
(33) out_of_area_code
Setting of the out-of-area error response
This command is used to set the out-of-area (IPX network) error response.
[Setting Example]
Note:
Normally this command is not required to be changed.
(34) prack
Setting of PRACK (Provisional Response Acknowledgment) function (RFC3262)
This command is used to enable/disable Provisional Response Acknowledgement (PRA) function
(RFC3262). When this is set enabled, the 18x cyclical-send of provisional response function can be spec-
ified.
[Setting Example]
MG(SIP) > set musictype
Select Music Type.
0=Type1(default)
1=Type2
2=Type3
3=Type4
Input:0
0: Type1: Minuet
1: Type2: For Elise
2: Type3: WAVE file
3: Type4: No sound
MG(SIP) > set out_of_area_code
Input the SIP Error Response code when the out
of area.
(400-606(default=408)):408 Set the error response code.
(Default: 408)
MG(SIP) > set prack
Select function to add 100rel to Supported
Header.
0=enable(default)
1=disable
Input:0
0: enable (Default)
1: disable