NEC SV8500, Manual

Page: 3230 / 3438

VOL.3-743
CHAPTER 4 CONFIGURATION SETUP
C
B
STEP 13: The LCD displays [Hold Multiplier] setting screen.
STEP 10: The LCD displays [LLDP Settings] menu. Select “4. Transmit Interval.”
STEP 12: The LCD displays [LLDP Settings] menu. Select “5. Hold Multiplier.”
Exit
[LLDP Settings]
4.Transmit Interval
5.Hold Multiplier
6.Fast Start Count
[Transmit Interval]
OK
5-32768 (second)
30
BK Cancel
- Set intervals to transmit LLDP packets using digit keys.
- You can set 5-32768 (default interval: 30) seconds.
- Press the software key for “BK” to delete the transmitting interval.
- Press the software key for “OK” when the [Transmit Interval] setting
is complete.
Note:
This data is valid when the LLDP mode is enabled.
STEP 11: The LCD displays [Transmit Interval] setting screen.
[Hold Multiplier]
OK
2-10 (multiple)
4
BK Cancel
- Set the time to live for the LLDP data using Digit Keys.
- The time to live will be determined by multiplying
[Transmit Interval] value by the [Hold Multiplier] value.
Note 1
- You can set 2-10 (default multiplier: 4) times.
- Press the software key for “BK” to delete the [Hold Multiplier] value.
- Press the software key for “OK” when the [Hold Multiplier] settings
is complete.
Note:
This data is valid when the LLDP mode is enabled.
Note 1:
When the value obtained by multiplying [Transmit Interval] value by the [Hold Multiplier] value
exceeds 65535 seconds, the time to live for the LLDP data will be 65535 seconds.
Exit
[LLDP Settings]
4.Transmit Interval
5.Hold Multiplier
6.Fast Start Count