NEC SV8500, Manual

Page: 1987 / 3438

VOL.2-1734
MG-SIP16
When this feature is available, calling party number is obtained in the following order
10 SET Δ DEFAULT
The command is used to set back to the default setting of MG-SIP16 configuration. Executing this com-
mand saves the default setting to the flash memory.
11 SET Δ DNSADDRESS
This command is used to specify the DNS IP address.
12 SET Δ DOMAIN
This command is used to specify the domain of MG-SIP16.
2 Obtain from Remote-URL (user Info section)
Order of priority
Obtaining pattern
1 Obtain from Remote-URL (user Info section)
2 Obtain from Remote-Name (Display Name section)
MG(SIP) > set cpn_pattern
What calling party number is given priority?
(0:displayname/1:Userinfo(default=0)): _
• 0: Display name is given
priority (default)
• 1: User info given priority
MG(SIP) > set default
Are you sure? Y/N=y
Config data default set.
MG(SIP) >
• Enter “y” to determine to set the default value
MG(SIP) > set dnsaddress
DNS IP address : 0.0.0.0
• Specify DNS IP address. (Default: 0.0.0.0)
MG(SIP) > set domain
Domain name(MAX128) : nec.com
• Specify the domain name. (Default: 0/Maxi-
mum: 128 bytes)
When this feature is unavailable, calling party number is obtained in the following order
Order of priority
Obtaining pattern