NEC SV8500, Manual

Page: 484 / 3438

VOL.2-231
MC & MG with PFT
Hong Kong
μ
law
Japan
μ
law
Korea
μ
/Α
law
Malaysia A law
Mexico A law
New Zealand A law
North America
μ
law
Singapore A law
Taiwan
μ
law
U.K. A law
Other
μ
/Α
law
Receive complete timing of PB direct-In [0-15]
Default value is 0.
False answer timing [0-15]
Default value is 0.
AMGVL: Assignment of Media Gateway Voice Control for LDM
Assign the voice control data for terminal that is connected to MG (COT). When AMGVL data is not as-
signed, AIVCL data setting is applied.
A RT (MG Storing)
Physical Route Number for Virtual Speech Channel of MG (COT)
TYPE
Select one of the followings:
• Route Specified
• Location ID Specified
B RT (MG Storing)
Displayed when TYPE=Route Specified is selected.
Physical Route Number for Virtual Speech Channel of terminal connected to MG
B LOC-ID:Location ID of IP terminal connected to MG (COT)
Displayed when TYPE=Location ID Specified is selected.
Setting of Jitter Buffer
JB_MIN:Jitter Buffer Minimum
JB_MAX:Jitter Buffer Maximum
Setting Type of Voice Packet Service
Type of service for MG (COT)
Setting of Payload
TYPE
SIZE
Setting of PAD
Click this check box when setting data for PAD value of MG.
PAD Information
This parameter is available only when the check box of “Setting of PAD” is ON.
No = 1: The PAD value of MG when DtermIP/Soft Phone/INASET is connected
No = 2: The PAD value of MG when Analog MC/Digital MC is connected
No = 3: The PAD value of MG when IPPAD is connected
No = 4: The PAD value of MG when MG is connected