NEC SV8500, Manual

Page: 3181 / 3438

VOL.3-694
CHAPTER 4 CONFIGURATION SETUP
[2] Configuration Setting by Web Programming
STEP 1: Select [Security]
→
[802.1X Supplicant]
→
[Supplicant].
STEP 2: Select “2. Enable.” Click the “OK” button.
STEP 3: Select [Security]
→
[802.1X Supplicant]
→
[Account].
STEP 4: Enter User ID for EAP-MD5 authentication. Then click the “OK” button.
For User ID, use 0-9, A-Z, a-z, *, #, . (period), - (hyphen) or _(underscore)
(maximum 32 characters).
STEP 5: Select [Security]
→
[802.1X Supplicant]
→
[Password].
STEP 6: Enter Password for EAP–MD5 authentication. Then click the “OK” button.
For Password, use 0-9, A-Z, a-z, *, #, . (period), - (hyphen), and _(underscore)
(maximum 32 characters).
STEP 7: Select [Security]
→
[802.1X Supplicant]
→
[EAP VLAN Mode].
STEP 23: The LCD returns to [Advanced Settings] menu. Press the software key for “Exit.”
E
STEP 24: The LCD returns to [Network Settings] menu. Press the software key for “Exit.”
[Network Settings]
Exit
1.DHCP Mode
2.IP Address
3.Default Gateway
STEP 25: The LCD returns to [Config] menu. Press the software key for “Save” to save settings.
[Advanced Settings]
1.LAN Port Settings
2.PC Port Settings
3.CDP Mode
Exit
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
END