NEC SV8500, Manual

Page: 3387 / 3438

VOL.3-900
CHAPTER 4 CONFIGURATION SETUP
Note 1:
“SIP server” used here refers to the Telephony Server. The Telephony Server acts as SIP server where
DT700 Series terminal is registered.
Note 2:
For IP address of SIP server (Telephony Server), refer to “Registration Destination of IP Devices/Stations”
in INTRODUCTION of Installation Manual.
Note 3:
Howler Tone is not available. Be sure to assign “Disable” to this parameter.
Note 4:
DESI-less mode allows access to line/feature keys automatically during off-hook state.
Note 5:
When all the applications registered to Home URL are in Fixed Mode, the Telephony Server must set “Hold
Fixation Mode” to Hold Key to retrieve a held call. Refer to “Non-exclusive Hold-D [N-7D] in Data Pro-
gramming Manual - Business for details” of “Hold Fixation Mode.”
Also, refer to the manual (4.5.3 Security Lock) of IP Phone Manager for setting the Lock Mode to Disable
to disable the security button. To connect the phone and the IP Phone Manager, port numbers to use must
match. Set the port number on the phone side from [0.Config] - [6.Application Setting] - [2.IPM Self Port].
Note 6:
This function requires an LCD.
Note 7:
This service is available to perform various tests such as Key Test, LED, LCD, and Call Test.
Note 8:
This item appears in the menu, but the assignment of this parameter is prohibited.
Note 9:
Key Kit 17 is provided for Hotel System feature.
Note 10:
Key Kit 16 is not displayed. Actual Key Kit will be displayed as “13, 14, 15, 17.”
Note 11:
Be careful when you specify “3.Enable(All Client)” because security service are disabled for Push when
“3.Enable(All Client)” is set.
Note 12:
“-” is displayed in default setting.
Note 13:
Odd numbered ports cannot be assigned.
6. Menu Key Mode Changes to menu key mode.
Enable X X N 1. Disable Sets the menu key mode disabled.
2. Enable Sets the menu key mode enabled.
7. DESI-less Mode Note 4 Sets the DESI-less screen view.
DESI-less
Mode 2
X N N 1. DESI-less Mode 1
Switches the LCD to DESI-less mode off-
hook.
2. DESI-less Mode 2 Does not change the LCD to DESI-less mode.
0. Config
(Continued)
(FW 5.0.0.0 or later)
Parameter Description Default
DT750
Series DT730
Series DT710
Series