NEC SV8500, Manual

Page: 3376 / 3438

VOL.3-889
CHAPTER 4 CONFIGURATION SETUP
2.Auto Setting Mode
Sets whether to perform data setting
automatically when LLDP packets are
received.
Enable X X X 1. Disable
DT700 Series does not perform data setting
automatically when LLDP packets are
received.
2. Enable
DT700 Series performs data setting
automatically when LLDP packets are
received.
3.RX Waiting Time
For Auto Setting, sets the waiting time until
DT700 Series receives LLDP packets (1-60
seconds).
15 X X X
4.Transmit Interval
Sets intervals to transmit LLDP packets (5-
32768 seconds).
30 X X X
5.Hold Multiplier
Sets a multiplier determining the time to live
for the LLDP packets to be transmitted (2-10
multiples).
4 X X X
6.Fast Start Count
Sets the number of times to transmit LLDP
packets at one-second intervals after DT700
Series starts up (1-10 times).
3 X X X
7.Transparent Mode
Sets whether Transparent Mode of LLDP
packets is enabled between the PC port and
the LAN port.
Enable X X X
1. Disable
Transparent Mode of LLDP packets is
disabled.
2. Enable
Transparent Mode of LLDP packets is
enabled.
8.Asset ID
Sets the Asset ID for LLDP packets to be
transmitted.
-
Note 12
X X X
0. Config
(Continued)
(FW 5.0.0.0 or later)
Parameter Description Default
DT750
Series DT730
Series DT710
Series