NEC SV8500, Manual

Page: 401 / 3438

VOL.2-148
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
5.4.2 How to Back Up and Restore Config Data by TFTP Connection (Remote)
This config download/upload is performed via TFTP.
Prepare the following:
- PC that is capable of Telnet and TFTP features.
- All the PCs have to belong to the same segment with 8LC Card.
- TFTP server has to be installed in advance.
- PCPro has to be installed in advance.
- 8LC Card is already registered to system and it is operating normally.
• Backing Up Config Data via TFTP
<Data Assignment on TFTP Server>
STEP 1
Create a folder to back up configuration data.
STEP 2
Start the TFTP server program.
STEP 3
Assign the folder as root folder, and then permit write and read behavior of this directory. For
more information, refer to the appropriate manual attached to the TFTP server program.
<Data Assignment on PCPro>
STEP 4
To search for the LENS of the target 8LC Card, use the IPAN command.
MC1 MC3 MC5 MC7
MC0 MC2 MC4 MC6
ALM PWR
ON
LINE
Ether
OPERATION
MC0 MC2 MC4 MC6
MC1 MC3 MC5 MC7
MC8
100M LINK CONSOLE
RESET
8LC Card
IP Network
TFTP Server
PCPro
Telnet PC
SYSTEM
Configdata
(3) Connect to control 8LC Card via
Telnet
(3) Connect to control 8LC Card via
Telnet
(2) Make environment setting for Telnet
(1) Make environment setting for TFTP
(4) Copy a config file into TFTP Server via TFTP
Note 1
: PCPro and Telnet both can be performed by single Personal Computer.
Note 1
Note 1