NEC SV8500, Manual

Page: 2185 / 3438

VOL.2-1932
MG-SIP16 [SCA-16SIPMG(US)]
Note:
In the above example, registration was attempted for 16 numbers toward the SIP server. However, 8 num-
bers failed. Assign MG-No by using ASRIL command. “CNT” is a parameter of ASRIL command.
Since SP-3988 MGSIP (16) PROG-G Issue 3 or later:
• When Port status (=0) is selected:
Note 1:
Status of each port is displayed as follows:
• When IPX status (=1) is selected:
[MG-No:9]
[MG-No:10]
[MG-No:11]
[MG-No:12]
[MG-No:13]
[MG-No:14]
[MG-No:15]
MG(SIP)> show status
0:Port status
1:IPX status
2:SIP status
3:CH status
9:Exit
0: Port status (Default)
1: Telephony Server network registration status
2: SIP network registration status
3: Information of channels in use
9: Exit
Please choose a reference number:0
IPX Port link up(100Base-TX/Full)
SIP Port link up(100Base-TX/Full)
Note 1
Port type Status of port to LAN Status of port to SIP network
100M/Half IPX port link up (100Base-TX/Half) SIP port link up (100Base-TX/Half)
100M/Full IPX port link up (100Base-TX/Full) SIP port link up (100Base-TX/Full)
10M/Half IPX port link up (10Base-T/Half) SIP port link up (10Base-T/Half)
10M/Full IPX port link up (10Base-T/Full) SIP port link up (10Base-T/Full)
Link Down IPX port link down SIP port link down
MG(SIP)> show status
0:Port status
1:IPX status
2:SIP status
3:CH status
9:Exit
0: Port status (Default)
1: Telephony Server network registration status
2: SIP network registration status
3: Information of channels in use
9: Exit