NEC SV8500, Manual

Page: 2938 / 3438

VOL.3-451
CHAPTER 4 CONFIGURATION SETUP
1.4.9.3 Setting Music On Hold
Note:
The following procedure explains how to set Music On Hold to be heard by Dterm user.
1. Ping
2. Music Select
Up Down
1. Download Data
2. Default Data
Cancel OK
STEP 2: Open the Administrator Menu by pressing "Hold"+"#"+"0" on the User Menu.
STEP 1: Open the User Menu by pressing "Hold"+"Transfer"+"*"+"#" while the terminal is in normal operation,
indicating an error message or "DHCP Connecting.../DRS(1st) Connecting..." on the display.
STEP 3: Select "0. Next Page (P1 >> P2)" by pressing "0" on the menu. The following Administrator Menu (Page 2) is
displayed. Select "2. Music Select" by pressing "2" on the menu.
1. DtermIP Mode
2. Download Address
Up Down
Exit
1. DtermIP Mode
2. Download Address
3. Area ID
4. Port
5. Download
6. SoftReset
7. Factory Value
8. Type of Service
9. Language
0. Next Page (P1 >> P2)
Administrator Menu (Page 1) List
Up
Down
[Administrator Menu (Page 1)]
1. DHCP Mode
2. DRS Address Primary
Up Down Save Cancel
[User Menu]
Two items are displayed on the terminal.
The following Administrator Menu is displayed.
A
STEP 4: The currently setting for Music On Hold is flashing. To change the current setting for the Music On Hold,
press the applicable number and then press OK key. If you don't need to change, press Cancel Key.
When using the downloaded Music On Hold Download Data
When using the default Music On Hold Default Data
Note:
When using Backup DRS, "DRS(2nd) Connecting...", "DRS(3rd) Connecting...", or "DRS(4th) Connecting..."
will be displayed instead of "DRS(1st) Connecting...".
After the Music On Hold selection has been made, return to the Administrator Menu by selecting
"0. Next Page (P2 >> P1)".