NEC SV8500, Manual

Page: 1371 / 3438

VOL.2-1118
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
16. SHOW
Δ
ONE_TIME_PASS
This command is used to display the one-time password.
17. SHOW Δ OWN_NAME
This command is used to display the host name of MG(PRI).
18. SHOW Δ PAD P1
This command is used to display the specified PAD register for voice quality tuning. The following is an
example in the case of displaying PAD0.
MG-PRI(SIP)>SHOW ONE_TIME_PASS
One time password is 123456.
The current setting is displayed.
MG-PRI(SIP)>SHOW OWN_NAME
Own Name : mgpri.nec.com
The current setting is displayed.
MG-PRI(SIP)>SHOW PAD0
P1 -Specify the register number to be displayed.
0-4 =PAD Register Number
value is 0x0000
The current setting is displayed.
A-law/u-1aw Setting:0
PAD Selection
PAD Control
PAD Pattern No.
Data PAD Pattern No. :0
:0
:0
:0
:0
- CODEC
0=MGC Control (PBX System Data)
1=
μ
-law
2=A-law
3=Convert from A-law to
μ
-law
4=Convert from
μ
-law to A-law
- PAD selection (0/1=Standard/Flexible)
- PAD Control
0=Receiving Control (MG
→
ISDN Network)
1=Sending Control (ISDN Network
→
MG)
2=Fixed to ARTD
3=Sending/Receiving Control
- PAD Pattern number (0-4)
- Data PAD Pattern Number
0=64K
1-4=Not used
- Flexible PAD #
N -Recv (0-36)
- Flexible PAD # N -Send (0-36)