NEC SV8500, Manual

Page: 149 / 3438

VOL.1-89
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
This chapter explains how to assign IP-related data using PCPro. Detailed information on each subject is ex-
plained in the related guides. This chapter covers the following subjects:
• IP Related Basic Programming
Explains the basic programming to use IP-related features. Internal PH, Hunting Methods and virtual PIR
assignment are covered here.
• Network Data Programming
Covers network level features such as Bandwidth Control, Level Diagram, Echo Canceller, VLAN.
• Data Programming Quick Reference Sheet
Provides Quick Reference Sheets that can be used for actual installation. A series of commands are listed
for programming an IP related feature.
1. Service Features Covered in this Manual
This chapter covers the outline of data programming on the following features. Therefore, other information
such as Service Conditions should be referred to other documents. The detailed information is explained in the
following documents shown in the table below.
NO.
Service Reference Documents
1 Peer-to-peer Connection by IP Stations Data Programming Manual - Business [I-43] IP Enabled Dterm
2 MAC Authentication Mode
Data Programming Manual - Business [I-43] IP Enabled Dterm
3 Login Mode Data Programming Manual - Business [I-43] IP Enabled Dterm
4
IP Terminal and Legacy Station/Trunk Connection
via IPPAD
Data Programming Manual - Business, Basic Data Programming
5
Analog Terminal Connection via Analog 2MC/MC
& MG with PFT
Peripheral Equipment Description - Analog 2MC / MC & MG with
PFT
6 How to Assign Internal PHD
Data Programming Manual - Business, Assignment of Basic Office
Data
7 How to Assign Internal PHE
Data Programming Manual - Business, Assignment of Basic Office
Data
8 How to Assign Hunting Method
Data Programming Manual - Business, Assignment of Basic Office
Data
9 How to Assign Virtual PIR
Data Programming Manual - Business, Assignment of Basic Office
Data
10 Peer to Peer Bandwidth Control (by Location ID)
Data Programming Manual - Business, Assignment of Basic Office
Data, [P-75] Peer to Peer Bandwidth Control (by Location ID)
11 Virtual LAN (VLAN)
Data Programming Manual - Business, Assignment of Basic Office
Data
12 PAD Control by Location ID
Data Programming Manual - Business, Assignment of Basic Office
Data
13 Echo Canceler Control by Location ID
Data Programming Manual - Business, Assignment of Basic Office
Data