NEC SV8500, Manual

Page: 2235 / 3438

VOL.2-1982
VS-32 Conference Server
INIT
1. To initialize Configuration Data to the factory default setting:
REBOOT
1. To reboot the VS-32 Conference Server:
Note:
This command cannot check the normality of configuration files. In case that a wrong file has been down-
loaded, use the INIT CONFIG command to return to default settings.
GET
1. To download the configuration of data from the specified TFTP server:
Note:
This command does not verify the config data downloaded from TFTP Server. If a wrong config data is
downloaded, use the INIT CONFIG command to initialize the settings first, and then set a correct one.
PUT
1. To upload the configuration of data to the specified TFTP server:
VS-32> INIT CONFIG
*** Warning!! ***
This command is for initialize config data.
If this command is executed, your configuration is deleted!!
OK?[Y/N]:
Y
It’s recommended to back up your configuration!!
really OK??[Y/N]:
Y
####
Complete
reboot....
STEP1:Your configuration is denied
Y = Initialize
N = Cancel
STEP2:A value entered is re-con-
firmed.
Y = Initialize
N = Cancel
STEP1
STEP2
VS-32> REBOOT
May I do reboot?[Y/N]: Y
STEP1
STEP1:Enter Y or N to execute reboot
Y=Reboot
N=Cancel
VS-32> GET CONFIGDATA 100.100.100.4
Configuration data has been downloaded
STEP1
STEP1:Enter an IP Address for TFTP server