manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

You can show or hide model and annotation crop regions. See 

Showing or Hiding Crop Regions

 on page

165. You can also resize a crop region by dragging the blue controls or by explicitly setting the size. See

Resizing Crop Regions Graphically

 on page 165 and 

Resizing Crop Regions Explicitly

 on page 166.

Model Crop Region

The model crop region crops model elements, detail elements (such as insulation and detail lines), section
boxes, and scope boxes at the model crop boundary. Visible crop boundaries of other related views are also
cropped at the model crop boundary.

Annotation Crop Region

An annotation crop region fully crops annotation elements when it touches any portion of the annotation
element, so that no partial annotations are drawn. Annotations (such as symbols, tags, keynotes, and
dimensions) that reference hidden or cropped model elements do not appear in the view, even if they are
inside the annotation crop region. For example, if a door has been cropped from the view by the model
crop, the door tag will not be visible even if it is positioned inside the annotation crop.

Datum (grids and levels) that cross the model crop region display their heads and tails so that they are visible
inside the annotation crop boundary. Datum are not resized; when you turn off the crop region, (the Do
Not Crop View option) datum display at the original size they were drawn.

The annotation crop does not display by default when you show crop regions in a primary view. The
annotation crop does display by default when you show crop regions in dependent views. For more
information on primary and dependent views, see 

Duplicate Dependent Views

 on page 144.

164 | Chapter 4   Project Views

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual preview
AlliedWare Plus 5.2.1
Brand: Allied Telesis Pages: 1294
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
American DJ myDMX 2.0 User Instructions preview
myDMX 2.0
Brand: American DJ Pages: 21
I.R.I.S. POWERSCAN 9.5 User Manual preview
POWERSCAN 9.5
Brand: I.R.I.S. Pages: 182
Teklynx Discover ActiveX Programmer'S Manual preview
Discover ActiveX
Brand: Teklynx Pages: 165
Brocade Communications Systems 8/24 Administrator'S Manual preview
8/24
Brand: Brocade Communications Systems Pages: 64
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Brand: Novell Pages: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Brand: Novell Pages: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Brand: Novell Pages: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Brand: Novell Pages: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Brand: Novell Pages: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Brand: Novell Pages: 7
Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual preview
LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS
Brand: Novell Pages: 93
Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual preview
OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX
Brand: Novell Pages: 254
Novell LINUX ENTERPRISE DESKTOP 10 Quick Manual preview
LINUX ENTERPRISE DESKTOP 10
Brand: Novell Pages: 9
Novell IFOLDER 3.6 - SECURITY ADMINISTRATION Manual preview
IFOLDER 3.6 - SECURITY ADMINISTRATION
Brand: Novell Pages: 22
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual preview
LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009
Brand: Novell Pages: 236
Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION Manual preview
GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION
Brand: Novell Pages: 75

Brands by name

Popular brands

Load more brands