manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Resizing or Flipping Roof Gutters

To resize roof gutters

1

In the drawing area, select the gutter.

If many elements near the gutter make selection difficult, use the filter selection tool to select

the gutter. Highlight the area near the gutters using a pick box, and click 

 on the Options

Bar. Select Roof (Gutters), and click OK.

2

Move the drag controls to the desired location.

For more information on using drag controls, see 

Controls and Shape Handles

 on page 279.

To flip roof gutters

1

In the drawing area, select the gutter.

2

If you are in a 3D view, click the flip controls to flip the gutter around the vertical or horizontal
axis.

If you are in a 2D view, right-click the gutter and select Flip About Horizontal Axis or Flip About
Vertical Axis.

Adding or Removing Segments of the Gutter

1

In the drawing area, select the gutter.

If many elements near the gutter make selection difficult, use the filter selection tool to select

the gutter. Highlight the area near the gutter is using a pick box, and click 

 on the Options

Bar. Select Roof (Gutters), and click OK.

2

On the Options Bar, click Add or Remove Segments.

3

Click a reference edge to add a gutter or remove a gutter.

NOTE

Watch the status bar. It will indicate valid references, or points where you can add or remove

gutters. For example, if you are adding gutters to a roof, a valid reference might be: Roofs : Basic
Roof : Reference. When you add or remove segments of a gutter in a section view, place the cursor
near the corners of the element to highlight the reference, or press TAB.

Changing Horizontal and Vertical Offset

You can change the horizontal or vertical offset of a gutter through its properties or by graphically moving
the gutter. See 

Slab Edge Properties

 on page 646.

Horizontal Move

To move a single gutter segment, select the gutter and drag it horizontally.

To move a multi-segmented gutter, you need to select the shape handle of the gutter. Place the cursor over
the gutter and press 

TAB

 to highlight the shape handle. Watch the status bar to be sure you are highlighting

the shape handle. Click to select the shape handle. Move the cursor left or right to change the horizontal
offset. This affects the horizontal offset of all segments of the gutter, so that the segments are symmetrical.

Roof Gutters | 631

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Brand: Canon Pages: 84
TANDBERG Compliance Appliance Deployment Manual preview
Compliance Appliance
Brand: TANDBERG Pages: 41
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
FARONICS POWER SAVE MAC Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 34
MACROMEDIA BREEZE 5 Integration Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 232
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Brand: Symantec Pages: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Brand: Seagate Pages: 2
CAKEWALK Cakewalk SONAR User Manual preview
Cakewalk SONAR
Brand: CAKEWALK Pages: 610
Agilent Technologies N5416A Release Notes preview
N5416A
Brand: Agilent Technologies Pages: 9
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
AVG Anti-Virus Business Edition 2011 User Manual preview
Anti-Virus Business Edition 2011
Brand: AVG Pages: 267
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Brand: Juniper Pages: 14
3Com pcXset - NBX - PC Getting Started Manual preview
pcXset - NBX - PC
Brand: 3Com Pages: 26
VERITAS NetBackupTM 5.0 User Manual And Product Specifications preview
NetBackupTM 5.0
Brand: VERITAS Pages: 428
Xerox 6100BD - Phaser Color Laser Printer User Manual preview
6100BD - Phaser Color Laser Printer
Brand: Xerox Pages: 56
Nortel Symposium TAPI Service Provider for Succession 3.0 User Manual preview
Symposium TAPI Service Provider for Succession 3.0
Brand: Nortel Pages: 198
SanDisk SSD ULTRA320 SCSI 3.5" DC-000255 Product Update preview
SSD ULTRA320 SCSI 3.5" DC-000255
Brand: SanDisk Pages: 3
Canon Digital Video Software (Macintosh) Ver.11 Instruction Manual preview
Digital Video Software (Macintosh) Ver.11
Brand: Canon Pages: 56

Brands by name

Popular brands

Load more brands