manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

■

To open a second window for the current view, click Window menu

 ➤ 

New Window. This command is

useful if you want to pan and zoom on certain areas of the design, while also viewing the entire design
in another window. (Use the Tile command to see both views at the same time.) Any changes that you
make to the project in the new window also appear in other windows of the project.

■

To arrange all open windows in a series in the drawing area, click Window menu

 ➤ 

Cascade.

■

To see all open views at the same time, click Window menu

 ➤ 

Tile.

■

To move the icons of all minimized project views to the bottom of the drawing area, click Window
menu

 ➤ 

Arrange Icons.

■

To close all hidden views, click Window menu

 ➤ 

Close Hidden Windows. If more than one project is

open, one window per project remains open.

For more information, see 

Navigating the Drawing Area

 on page 64.

To invert the background color of the drawing area:

1

Click Settings menu

 ➤ 

Options.

2

In the Options dialog, click the Graphics tab.

3

Select or clear the Invert background color option.

4

Click OK.

Status Bar

The status bar is in the lower-left corner of the Revit Architecture window. When you are using a command,
the status bar provides tips or hints on what to do. When you are highlighting an element or component,
the status bar displays the name of the family and type.

To hide the status bar, click Window menu

 ➤ 

Status Bar. To show the status bar again, repeat the command.

Options Bar

The Options Bar is located below the menu bar and toolbars, and to the right of the Type Selector. Its contents
change depending on the current command or selected element.

Type Selector

The Type Selector is located below the toolbars and above the Design Bar. Its contents change depending
on the current function or selected component. When you place a component in a drawing, use the Type
Selector to specify the type of component to add. When you have selected an existing component, use the
Type Selector to change its type.

Parts of the Revit Interface | 61

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Canon PowerShot G10 - Digital Camera - Compact Software User'S Manual preview
PowerShot G10 - Digital Camera - Compact
Brand: Canon Pages: 49
Omron FLEXXPECT-PHARMA Brochure preview
FLEXXPECT-PHARMA
Brand: Omron Pages: 2
Hamlet Exagerate ZELIG-CAM PRO User Manual preview
Exagerate ZELIG-CAM PRO
Brand: Hamlet Pages: 6
AVIRA ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS User Manual preview
ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS
Brand: AVIRA Pages: 67
F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61... Administrator'S Manual preview
INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...
Brand: F-SECURE Pages: 414
ScanSoft TextBridge PRO 8.5 User Manual preview
TextBridge PRO 8.5
Brand: ScanSoft Pages: 243
MACROMEDIA FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH Manual preview
FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH
Brand: MACROMEDIA Pages: 830
Elgato EyeTV Hybrid Hardware Reference Manual preview
EyeTV Hybrid
Brand: Elgato Pages: 5
Extreme Networks Ridgeline 3.0 Manual preview
Ridgeline 3.0
Brand: Extreme Networks Pages: 376
Polycom Conference Composer User Manual preview
Conference Composer
Brand: Polycom Pages: 29
ZyXEL Communications IPSEC VPN CLIENT Brochure preview
IPSEC VPN CLIENT
Brand: ZyXEL Communications Pages: 2
GAI-Tronics XAC0140A Installation Instructions preview
XAC0140A
Brand: GAI-Tronics Pages: 5
Ulead MEDIASTUDIO PRO 6.0 User Manual preview
MEDIASTUDIO PRO 6.0
Brand: Ulead Pages: 360
Yamaha MOTIF-RACK ES Owner'S Manual preview
MOTIF-RACK ES
Brand: Yamaha Pages: 33
MACROMEDIA FLASH 8-USING FLASH Use Manual preview
FLASH 8-USING FLASH
Brand: MACROMEDIA Pages: 678
Novell EDIRECTORY 8.8 SP1 Installation Manual preview
EDIRECTORY 8.8 SP1
Brand: Novell Pages: 150
National Instruments BridgeVIEW User Manual preview
BridgeVIEW
Brand: National Instruments Pages: 455
KAPERSKY ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER...
Brand: KAPERSKY Pages: 143

Brands by name

Popular brands

Load more brands