manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

6

Select a Discipline: Common or Structural.

7

On the Type of Parameter menu, click the appropriate parameter type.

Choices are:

Description

Name

Completely customizable. Can be used to collect unique data.

Text

A value that is always expressed as an integer.

Integer

Used to collect miscellaneous numeric data. Can be defined by a formula. Can also
have real numbers.

Number

Can be used to establish the length of an element or sub-component. Can be
defined by a formula.

Length

Can be used to establish the area of an element or sub-component. Formulas can
be used in this field.

Area

Can be used to establish the length of an element or sub-component. Formulas
can be used in this field.

Volume

Can be used to establish the angle of an element or sub-component. Formulas can
be used in this field.

Angle

Can be used to create parameters that define slope.

Slope

Can be used to create currency parameters.

Currency

Provides web link to user defined url.

URL

Establishes parameters in which a specific material can be assigned.

Material

Used most often for instance properties when the parameter is defined with either
a Yes or No.

Yes/No

Used with nested components and allows you to swap components after the family
is loaded into a project.

Family Type

8

For Group parameter under, select a value.

After the family is loaded into a project, this value determines which group header the parameter
displays under in the Element Properties dialog.

9

Select either Instance or Type. This defines whether the parameter is an Instance or Type
parameter.

10

Click OK.

NOTE

To assign a material to a family element, save the family and load it into a project. Place the

family in the project and select it. Click 

 and set a value for the material parameter.

370 | Chapter 8   Creating Your Own Components (Families)

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Garmin GPSMAP GPSMAP 196 Getting Started preview
GPSMAP GPSMAP 196
Brand: Garmin Pages: 4
Garmin MapSource Owner'S Manual preview
MapSource
Brand: Garmin Pages: 2
AVIRA ANTIVIR VIRUS SCAN ADAPTER Configuration preview
ANTIVIR VIRUS SCAN ADAPTER
Brand: AVIRA Pages: 29
McDATA OPENconnectors Command Line Interface Manual preview
OPENconnectors
Brand: McDATA Pages: 170
GARDINER TECHNOLOGY GARDTEC SPEECH DIALLER Installation & Programming Instructions preview
GARDTEC SPEECH DIALLER
Brand: GARDINER TECHNOLOGY Pages: 38
ITech IT9000 Installation Instruction preview
IT9000
Brand: ITech Pages: 22
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
Quantum PX500 Series Installation Instructions Manual preview
PX500 Series
Brand: Quantum Pages: 26
Quantum Management Console 4.4 User Manual preview
Management Console 4.4
Brand: Quantum Pages: 120
HP SysMan User Manual preview
SysMan
Brand: HP Pages: 15
HP Surestore 5200ex - Optical Disk Drives User Manual preview
Surestore 5200ex - Optical Disk Drives
Brand: HP Pages: 77
HP T9576G06 Management Manual preview
T9576G06
Brand: HP Pages: 778
Packet8 SoftalK User Manual preview
SoftalK
Brand: Packet8 Pages: 43
Autodesk 24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD Questions And Answers preview
24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD
Brand: Autodesk Pages: 11
Autodesk 057A1-05A111-10MD - AutoCAD LT 2009 Manual preview
057A1-05A111-10MD - AutoCAD LT 2009
Brand: Autodesk Pages: 31
Autodesk 12909-091452-9750 - Map 3D 2006 Student Edition Installation Manual preview
12909-091452-9750 - Map 3D 2006 Student Edition
Brand: Autodesk Pages: 35
Autodesk 057A1-05A111-10MB - AutoCAD LT 2009 Installation Manual preview
057A1-05A111-10MB - AutoCAD LT 2009
Brand: Autodesk Pages: 58
Qlogic Fast Fabric User Manual preview
Fast Fabric
Brand: Qlogic Pages: 174

Brands by name

Popular brands

Load more brands