Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 603 / 1646

You can place sketched asymmetrical openings on arc walls using in-place families.
Adding Arc Walls
1 In a floor plan or 3D view, click Modelling menu
➤
Wall, or on the Modelling tab of the Design
Bar, click Wall.
2 Click one of the arc tools.
3 Sketch the arc wall.
For more information, see Sketching on page 251.
4 If necessary, change the value of the angular dimension to increase or decrease the size of the
arc.
a On the Design Bar, click Modify.
b In the drawing area, select the arc wall.
c Click the angular dimension value, enter a new value, and press Enter .
Resizing Arc Walls
1 Select the arc wall.
2 Drag the end controls to change the arc length.
3 On the Options Bar, select Keep Concentric to change the radius of the arc while keeping the
radius concentric, or clear Keep Concentric to retain existing end conditions such as end point
location or tangency to a straight wall.
4 Drag the middle control.
Cutting Openings in Arc Walls
You can cut square or rectangular openings into arc walls. As you sketch openings in an arc wall, permanent
dimensions appear. If the wall has a top constraint set to a level, dimensions appear from both the top and
base constraints. If the wall has a top constraint that is explicit, dimensions appear from the base constraint
only.
To cut openings in arc walls
1 In a 3D or elevation view, select an arc wall.
2 On the Options Bar, click Opening.
Arc Walls | 565