Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 975 / 1646

A floor plan containing rooms, and a room schedule
Unplacing or Moving Rooms
When you add a room to a plan view, the project stores information about the room. This can include
information that you add using room properties, such as the room name, surface finishes, occupancy, and
so on. (See
Room Properties on page 939.) You can see information about rooms in a room schedule. If you
want to retain information about a room but remove it from its current location in the building model,
unplace the room as follows.
To unplace a room
1 Open a plan view or a section view that displays the room.
2 Select the room.
Check the status bar to be sure that you have selected the room and not the room tag. The status
bar displays the following:
Rooms : Room : <room name>
3 Delete the room from the plan view, using any of the following methods:
■ Press DELETE or CTRL+X .
■ Right-click the room, and click Delete.
■ Click Edit menu
➤
Delete.
The room is removed from its location in the building model. However, the project still contains
the information about the room. In a room schedule, the room is listed as Not Placed. If desired,
you can place the room in another location. See
Placing an Unplaced Room on page 938.
Removing Rooms | 937