manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Setting Detail Level Scale Values

1

Click Settings menu

 ➤ 

Detail Level.

2

Click 

 to move scale values to the right or click 

 to move detail levels to the left. You

cannot select scales individually; they move in sequential order only.

3

To return to the original settings, click Default.

Specifying the Detail Level for a View

1

Click View menu

 ➤ 

View Properties.

2

Select Coarse, Medium, or Fine for the Detail Level parameter.

Alternatively, on the View Control Bar at the bottom of the drawing area, click the Detail Level icon and
select an option, as shown in the following image.

For more information on detail level, see 

Detail Level

 on page 503.

Options

You can configure global settings for your Revit installation. Global settings include

■

General options: Save notifications, user name, and journal file clean-up.

■

Graphics options: Configure your video card for improved display performance, and configure colors
for selection, background, and error messages.

■

File location options: Specify paths for files and directories.

■

Rendering options: Specify paths for files used for render appearances and decals, and specify the location
of the ArchVision Content Manager (ACM), if needed.

■

Spelling options: Specify options for the spell checker.

■

SteeringWheels options: Specify options for the SteeringWheels view navigation tools.

■

ViewCube options: Specify options for the ViewCube navigation tool.

You can specify options at all times, including when the drawing area is blank.

Setting Options

1

Click Settings menu

 ➤ 

Options.

2

Specify general, graphics, file location, rendering, spelling, SteeringWheels, and ViewCube
options.

3

Click OK.

504 | Chapter 9   Customizing Project Settings

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

TANDBERG Movi 3.0 Reference Manual preview
Movi 3.0
Brand: TANDBERG Pages: 66
TANDBERG Content Server None User Manual preview
Content Server None
Brand: TANDBERG Pages: 14
Quantum GoVault 40GB User Manual preview
GoVault 40GB
Brand: Quantum Pages: 91
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
MACROMEDIA FLASH MEDIA SERVER 2-INSTALLING FLASH MEDIA SERVER... Manual preview
FLASH MEDIA SERVER 2-INSTALLING FLASH MEDIA SERVER...
Brand: MACROMEDIA Pages: 16
ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual preview
BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3
Brand: ACRONIS Pages: 54
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Brand: F-SECURE Pages: 20
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS Getting Started Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS
Brand: IBM Pages: 12
Sling Media Slingbox User Manual preview
Slingbox
Brand: Sling Media Pages: 112
Livescribe DESKTOP VERSION 1.2 User Manual preview
DESKTOP VERSION 1.2
Brand: Livescribe Pages: 70
Packet8 SoftalK User Manual preview
SoftalK
Brand: Packet8 Pages: 43
Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2 Upgrade Manual preview
STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
Brand: Juniper Pages: 5
GRASS VALLEY GV Browse User Manual preview
GV Browse
Brand: GRASS VALLEY Pages: 24
IBM VIAVOICE-SIMPLY DICTATION FOR MAC OS X User Manual preview
VIAVOICE-SIMPLY DICTATION FOR MAC OS X
Brand: IBM Pages: 92
ACD Systems ACDSEE 12 User Manual preview
ACDSEE 12
Brand: ACD Systems Pages: 232
Epson WorkForce Pro WP-4015 DN User Manual preview
WorkForce Pro WP-4015 DN
Brand: Epson Pages: 134
M-Audio ProjectMix Control Manual preview
ProjectMix
Brand: M-Audio Pages: 7
M-Audio M-Tron Manual preview
M-Tron
Brand: M-Audio Pages: 14

Brands by name

Popular brands

Load more brands