manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

shading

A model graphics style in which Revit Architecture shows the image with all surfaces shaded

according to their material color settings and project light locations. A default light source provides
illumination for the shaded elements.

See 

Shading Model Graphics Style

 on page 203.

shading with edges

A model graphics style in which Revit Architecture shows the image with all surfaces

shaded according to their material color settings and project light locations, and with all non-occluded edges
drawn. A default light source provides illumination for the shaded elements.

See 

Shading with Edges Model Graphics Style

 on page 203.

shadow study

See 

solar study

 on page 1458.

shaft

An opening that extends the entire height (or through specified levels) of a building, cutting through

floors, ceilings, and roofs, as appropriate.

For example, the stairwell and elevator shaft in the following section view were created as shafts.

See 

Cutting Shaft Openings 

 on page 661.

Glossary | 1453

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Autodesk AUTOCAR CIVIL 2010 Brochure preview
AUTOCAR CIVIL 2010
Brand: Autodesk Pages: 6
Genesys Hosted Provider Edition (HPE) 8.1 Product Availability Announcement preview
Hosted Provider Edition (HPE) 8.1
Brand: Genesys Pages: 5
ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual preview
BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3
Brand: ACRONIS Pages: 54
SanDisk FlashSoft Data Management preview
FlashSoft
Brand: SanDisk Pages: 18
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Brand: Yamaha Pages: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Brand: Yamaha Pages: 6
Yamaha Audio Owner'S Manual preview
Audio
Brand: Yamaha Pages: 7
Yamaha Arp Owner'S Manual preview
Arp
Brand: Yamaha Pages: 9
Yamaha AE041 Owner'S Manual preview
AE041
Brand: Yamaha Pages: 11
Yamaha Card Filer Manual preview
Card Filer
Brand: Yamaha Pages: 15
Yamaha Add-On Effects Manual preview
Add-On Effects
Brand: Yamaha Pages: 14
Yamaha AN200 Editor Manual preview
AN200 Editor
Brand: Yamaha Pages: 72
Yamaha 03DVEK Owner'S Manual preview
03DVEK
Brand: Yamaha Pages: 129
Red Hat Application Server Manual preview
Application Server
Brand: Red Hat Pages: 296
CyberLink YouCam User Manual preview
YouCam
Brand: CyberLink Pages: 75
ION MixMeister EZ Setup & Troubleshooting preview
MixMeister EZ
Brand: ION Pages: 12
Intel SE72xx User Manual preview
SE72xx
Brand: Intel Pages: 30
Solid State Logic One Stop Vocal Processing Plug-in Vocalstrip User Manual preview
One Stop Vocal Processing Plug-in Vocalstrip
Brand: Solid State Logic Pages: 21

Brands by name

Popular brands

Load more brands